Dell Latitude C/Dock II Expansion Station Guide D'information page 15

Docking for the First Time With Windows XP and Windows 2000
Dock and turn on your computer.
1
Press <F2> during the system boot routine to view the system setup
2
program.
Set Docking IRQ to Optimized.
3
Set Universal Connect to Enabled.
4
Exit the system setup program.
5
Your system will continue the boot process.
In Windows 2000, the Add New Hardware Wizard appears.
NOTE: In Windows XP , the operating system automatically installs the drivers
in the background. In Windows 2000, the Add New Hardware Wizard
automatically installs your drivers.
NOTE: In Windows XP and Windows 2000, to reinstall drivers or ensure the
best drivers are installed, see "Updating Drivers in Windows XP , Windows
2000, or Windows Me" later in this document.
Docking for the First Time With Windows Me
Dock and turn on your computer.
1
Press <F2> during the system boot routine to view the system setup
2
program.
Set Docking IRQ to Optimized.
3
Set Universal Connect to Enabled.
4
Exit the system setup program.
5
Your system will continue the boot process.
The Add New Hardware Wizard appears.
Select Search for the Best Driver for Your Device (Recommended)
6
and click Next.
Click Next.
7
Follow the prompts on the Add New Hardware Wizard.
8
Whenever prompted, select Search for the Best Driver for Your
9
Device (Recommended) and click Next.
System In for m a ti o n G ui de
13