CLEANING
- The appliance must be thoroughly cleaned before it is put away, especially if the appliance
is not to be used for a longer period.
- Allow the appliance to cool down completely before cleaning.
- Clean the appliance with water and a mild detergent.
- If the burner or any of the tubes are clogged, use compressed air to remove the cause of
obstruction.
- Store the appliance in a dry place and away from dust. If possible put it back in its original
packaging.
TROUBLESHOOTING
PROBLEM
The appliance does not
ignite
Flame very weak, unsteady,
yellow...
Gas leaks from a valve
CAUSE
Not all necessary
valves are open
Gas cylinder empty
Pressure regulator
defective
Injector blocked or
clogged
Gas cylinder almost
empty
Pressure regulator
defective
Injector blocked or
clogged
Faulty valve
Pressure regulator
defective
22
CORRECTIVE ACTION
Open the gas cylinder valve
and the appliance valve
Replace the gas cylinder
Replace the pressure regulator
Clean or replace the injector
Replace the gas cylinder
Replace the pressure regulator
Clean or replace the injector
Have the appliance repaired by
a competent person
Replace the pressure regulator