Rothenberger Industrial 035984F Mode D'emploi page 20

REGULATOR AND HOSE
Use only the hose and hose connector provided. If a replacement is necessary, please
contact either our Customer Service Department or your local gas dealer. The use of
unauthorised or modified parts can create unsafe conditions and could result in serious injury
to the user. It is recommended that the regulator is changed within 5 years of the date of
manufacture. The hose used must conform to the relevant standard for the country of use.
The length of the hose must be max. 0.5 metres when the appliance is fitted to a gas
cylinder as described in this manual. Worn or damaged hoses must be replaced. Ensure that
the hose is not obstructed, kinked, or in contact with any part of the appliance other than at
its connection.
ASSEMBLY
ATTACHING THE MOUNTING BRACKET TO THE APPLIANCE
Attach the appliance to the mounting bracket using the wing nut, washer, spring washer and
screw provided for this purpose. Refer also to the photo on page 18 of this manual.
ATTACHING THE PIEZO IGNITION DEVICE (ART. NO. 035987F ONLY)
- Insert the Piezo ignition device into the
Piezo ignition bracket and secure it using the
nut provided.
- Connect the Piezo ignition device to the
ignition needle using the wire supplied.
20