BTI MLL 150 Notice D'utilisation page 73

THE DETECTOR DOES NOT RESPOND TO THE BEAM FROM ANOTHER
LASER UNIT
• The BTI Digital Laser Detector has been designed to work only
THE DETECTOR GIVES OFF A TONE BUT THE LCD DISPLAY WINDOW DOES
NOT FUNCTION
• If the detector is very cold, allow it to warm up in a heated area.
• If the LCD display window is still not functioning, take the
BRIGHT LIGHT SHINING ON DETECTOR CAUSES CONTINUOUS "ON-GRADE"
SIGNAL
• In the presence of very intense ambient light, the detector may
• Reposition the detector out of the intense light or shade the
Optional Accessories
USING THE LASER WITH ACCESSORIES (FIG. 1 INSET)
The laser is equipped with a 1/4" x 20 female thread (i) on the
bottom of the unit. This thread is to accommodate current or future
BTI recommended accessories. Only use BTI accessories specified
for use with this product. Follow the directions included with the
accessory.
Consult your BTI Partner for further information on the appropriate
accessories.
Protecting the Environment
N565330 crossline laser MLL 150 BTI - Part A - WithGreen.indd 71
All manuals and user guides at all-guides.com
with the KLL 150 and the MLL 150 and certain other compatible
line lasers.
detector to a BTI service centre.
give a false or erratic indication of level.
sensor window (u) to resume normal operation.
Separate collection. This product must not be disposed of
with normal household waste.
ENGLISH
71
10/20/2017 10:20:50 AM