Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
• Take the time to thoroughly read and understand this manual prior to operation.
ASSEMBLY AND ADJUSTMENT
Unpacking
FITTING THE WARNING LABEL
The safety warnings on the label shown on the laser must be
formulated in the language of the user.
For that purpose, a separate sheet of self-adhesive labels has been
supplied with the tool.
The warnings should read as follows:
• If the warnings are in a foreign language, proceed as follows:
Batteries (fig. 1)
BATTERY TYPE
This laser operates on four LR6 (AA-size) batteries.
TO INSTALL BATTERIES
1. Lift up the battery compartment cover (a) as shown in figure 1.
2. Insert four fresh LR6 (AA-size) batteries in the compartment,
58
N565330 crossline laser MLL 150 BTI - Part A - WithGreen.indd 58
All manuals and user guides at all-guides.com
WARNING! Do not place the laser in a position which
may cause anyone to intentionally or unintentionally stare
into the laser beam. Serious eye injury may result from staring at
the beam.
WARNING: Check that the safety warnings on the label have been
formulated in your language.
LASER RADIATION
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
– Remove the required label from the sheet.
– Carefully place the label over the existing label.
– Press the label in place.
placing the batteries according to (+) and (–) on the inside of the
battery door.
10/20/2017 10:20:50 AM
Publicité
