BTI MLL 150 Notice D'utilisation page 57

• Do not remove or deface warning labels. If labels are removed user or
• Position the laser securely on a level surface. Damage to the laser or
Additional Safety Instructions for Lasers
• This laser complies with class 2 according to EN 60825-1:2007. Do not replace
• Do not use the laser for any purpose other than projecting laser lines.
An exposure of the eye to the beam of a class 2 laser is considered
safe for a maximum of 0.25 seconds. Eyelid reflexes will normally
provide adequate protection. At distances over 1 m, the laser
complies with class 1 and thus is considered completely safe.
• Never look into the laser beam directly and intentionally.
• Do not use optical tools to view the laser beam.
• Do not set up the tool at a position where the laser beam can cross any person
• Do not let children come in contact with the laser.
N565330 crossline laser MLL 150 BTI - Part A - WithGreen.indd 55
All manuals and user guides at all-guides.com
the risk of staring into the laser beam.
others may inadvertently expose themselves to radiation.
serious injury could result if the laser falls.
WARNING: Use of controls or adjustments or performance of
procedures other than those specified herein may result in hazardous
radiation exposure.
WARNING: Use of controls or adjustments or
performance of procedures other than those
specified herein may result in hazardous radiation
exposure.
WARNING: DO NOT DISASSEMBLE THE LASER.
There are no user serviceable parts inside. Disassembling the laser
will void all warranties on the product. Do not modify the product in
any way. Modifying the tool may result in hazardous laser radiation
exposure.
WARNING: Fire hazard! Avoid short-circuiting the contacts of a
removed battery.
a laser diode with a different type. If damaged, have the laser repaired by an
authorised repair agent.
at head height.
ENGLISH
55
10/20/2017 10:20:49 AM