Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
Description (fig. 1)
a. Battery compartment cover
b. Red indicator light
c. ON/OFF button, horizontal laser line
d. ON/OFF button, vertical laser line
e. ON/OFF button, side vertical laser line
f. Magnetic pivot bracket
g. Keyhole slot
h. Fine adjustment knob
i. 1/4" x 20 female thread
INTENDED USE
The crossline laser MLL 150 has been designed to project laser lines
to aid in professional applications. The tool can be used for horizontal
(level), vertical (plumb) and square alignment. The applications range
from layout of walls and windows to installation of framing track.
DO NOT use under wet conditions or in presence of flammable
liquids or gases.
The crossline laser is a professional tool. DO NOT let children come
into contact with the tool. Supervision is required when inexperienced
operators use this tool.
OPERATION
To Turn the Laser On and Off (fig. 1)
With the laser off, place it on a flat surface. This model has three
ON/OFF buttons, one for a horizontal laser line (c), one for a vertical
laser line (d) and one for a side vertical laser line (e). Each laser line
is powered on by pressing its ON/OFF button. The laser lines can be
powered one at a time or at the same time. Pressing the ON/OFF
buttons again turns the laser lines off.
60
N565330 crossline laser MLL 150 BTI - Part A - WithGreen.indd 60
All manuals and user guides at all-guides.com
WARNING: Never modify the power tool or any part of it. Damage
or personal injury could result.
10/20/2017 10:20:50 AM
Publicité
