Perel GIK07O Mode D'emploi page 4

3. General Guidelines
Refer to the Velleman® Service and Quality Warranty on the last pages of
this manual.
Keep this device away from dust and extreme temperatures.
Protect this device from shocks and abuse. Avoid brute force when
operating the device.
Familiarise yourself with the functions of the device before actually using it.

All modifications of the device are forbidden for safety reasons. Damage

caused by user modifications to the device is not covered by the warranty.
Only use the device for its intended purpose. Using the device in an

unauthorised way will void the warranty.
Damage caused by disregard of certain guidelines in this manual is not

covered by the warranty and the dealer will not accept responsibility for any
ensuing defects or problems.
Keep this manual for future reference.

4. Operation
Refer to the illustrations on page 2 of this manual.
Flying insects are attracted by the UV light [D], which is mounted behind a high-
voltage electrical grid [B]. When touching the grid, the insects are electrocuted
and fall into the collector [C].
1. Place or hang the insect killer in a dry location. Make sure the on-off
switch [A] is in the OFF position and plug the power cord into a suitable
mains outlet.
2. Switch on the insect killer by moving the on-off switch [A] to the ON position.
5. Cleaning and Maintenance
Warning! Never touch the metal grid with your bare hands. If you need to
clean the tray, follow the safety instructions carefully.
The cleaning frequency depends on the intensity of use. Check the tray of the
device at least once a week. Clean more often if necessary.
V. 03 – 21/11/2017
GIK07O/GIK08O
4 ©Velleman nv