Oursson COLOR COFFEE AM6250 Manuel D'instructions page 31

All manuals and user guides at all-guides.com
ASSEMBLY cOMPONENTS, Pic. c-1
Regulator of milk froth
Left door
Water tank
Heated cup holder
Main display with control touch pad
Coffee machine on/off button
Sub display
Hole for connection of milk supply pipe
Holes for pouring out of ready-to-drink coffee
Container for coffee beans
Regulator of grinding degree
Container lid for grind coffee
12
Container for grind coffee
13
Container lid for coffee beans
14
Milk frother
15
Right door
16
Brew unit
17
Residue container
18
Tray grating
19
Indicator of tray filling for liquid
20
Tray for liquid
21
Pipe holder for milk supply
22
Power supply switch
23
Tray-base with a bigger container for residue and
24
liquid (not included)
USAGE
Pic. С-2
control touch pad,
- Menu
- Americano
- Espresso
- Hot milk/froth
- Cappuccino
- Latte
- Hot water
- Grind coffee drinks
Operating procedures:
First start, Pic. D
Before the first start, clean the machine with a dry soft
cloth. Water container, measuring spoon
milk supply pipe , metallic cup holder
warm water and dishwashing liquid. Carefully dry out all
components. Install the cup holder
Pic. D-1. Disconnect the unit from power sources
prior assembling or dissembling procedures.
NOTE: Your coffee machine was completed industrial
trials that is why it may contain a slight amount of grind
coffee or water. In any event, we guarantee that your
coffee machine is completely new.
You may use coffee machine without a water filter.
In order to prevent scale formation inside the coffee
machine, we recommend using a water filter. Water filter
also decrease the required amount of scale cleaning
cycles.
NOTE: Use only water filters that are suitable for the
model of coffee machine.
1. To install a water filter, open the left door of coffee
machine and remove water tank, Pic. D-2.
2. Unpack a new filter, and shake it within ~3-5
seconds, Pic. D-3
3. Invert the filter and put him in any reservoir with cold
water for a few seconds, Pic. D-4.
4. Install the filter to the water tank as far as it can go,
Pic. D-5.
5. Fill the tank to the MAX level with water, Pic. D-6.
6. Install the container to the coffee machine, Pic. D-7.
7. Cap holder
Pic. D-17. We recommend you to heat the coffee cup
preliminary in order to achieve the best coffee taste.
8. Insert two-pin plug to the socket, Pic.D-8.
9. Switch on the coffee machine using a switcher at the
backside, Fig. D-9. An indication shall appear at the
both displays, Pic.D-10.
10. Put an empty cup under the pouring out holes, Pic.
D-11. Press switch on button at the front side of the
machine, Pic.D-12.
11. Coffee machine will perform self-diagnosis of all
components and switch to the operation state. Do
not interrupt self-diagnosis process, Pic.D-13.
12. Empty water out of the cup after self-diagno,
Pic.D-14.
13. To switch menu language – press
main display, Pic.D-15. Then choose the language
and press
14. Before the first use, in order to achieve the best
taste of coffee, perform flushing of pouring holes
– 2 or 3 cycles of coffee making. In order to do so,
press
, brush ,
wash out with
flushing, Main menu will appear at the main display.
15. To make coffee – put an empty cup under the
to the machine,
pouring holes and adjust the height of brew unit,
Pic. D-18.
16. Open container for coffee beans, fill it with coffee
beans and close the lid, Pic. D-19.
17. Make a coffee with one-touch, choose Americano
at the display, Pic. E-1. After that, make a coffee
drink two more times.
NOTE: Choose the side at which you will use the milk
frother. At the default, the hole for connection of milk
supply pipe is at the left side. If required, you may use
a right one. In order to do so – remove the cap from the
right side of milk forther and install it at the left one, Pic.
D-20.
Water filter shall be replaced once per 2
months.
• Use only clean/bottled noncarbonated
cold water or lukewarm water (23-24°c)
for water container. Do not use any
other liquids, including hot water. It may
damage the unit.
• Do not use coffee machine without water.
is heated while using. Put cups on it,
• During the process of cleaning/flushing,
a portion of hot water will be discharged
through the pouring holes. Be careful and
avoid contacts with hot water in order to
avoid burns.
, to exit the menu, Pic.D-16.
Menu at the main display, then select
Cleaning and press flushing, Pic.G-7. After
Menu at the
31