Wilson Electronics Signal 3G Mode D'emploi page 3

Signal 3G
460009
Optional Accessories
Mounting Plate DC/DC Power Supply w/3 ft. USB Cable
901138 859110
Before Getting Started
Before you install your Signal 3G booster
and start enjoying improved cellular
reception, please do the following:
1. Read through all the installation
steps. This will help you know what
to expect from start to fi nish.
2. Familiarize yourself with all materials
in your product package. This will
allow you to know which pieces are
referenced in the instructions.
Quick Installation
You can install your Signal 3G booster
using the following steps.
NOTE: Before completing your
installation, create a "soft" installation by
putting the components of your Signal 3G
booster in place and testing the operation
before mounting equipment.
1. Install the Outside Antenna. Select a
location on top of the structure
that is:
Need help?
Optional Kits
460109 460209
Cable Ext. Cable Ext.
Power Supply Power Supply
w/Mini USB Jack w/Mini USB Jack
12' Mag Antenna Mini Mag
www.wilsonelectronics.com
460309 460409
Cable Ext. Cable Ext.
DC Hardwire Power Suppy
Power Supply w/Mini USB Jack
Mini Mag 12' Mag Antenna
w/5 ft.RG174 Cable
• At least 12 inches from any other
antennas.
• Free of obstructions.
• At least 8 inches from any people.
The Outside Antenna must be
installed vertically on a metallic
surface.
Tech Support 866-294-1660
3