9. Certi cations
For Model: ZING C8, ZING C9, ZING C10, ZING C15, ZING C20
This product is certified to ANSI/CAN/UL-2272 by TUV.
The battery complies with UN/DOT 38.3.
Federal Communications Commission (FCC) Compliance Statement for USA
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device
maynot cause harmful interference, and (2) this device must accept any interference received, including interference that
maycause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Industry Canada (IC) Compliance Statement for Canada
This device complies with Industry Canada license-exempt RSS standard (s). Operation is subject to the following two
conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2)
l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement.
CAN ICES-3 (B)/NMB-3(B)
Segway parties are not responsible for any changes or modifications not expressly approved by us. Such modifications
could void the user's authority to operate the equipment.
13
10. Trademark and Legal Statements
Ninebot is the registered trademark of Ninebot (Beijing) Tech. Co., Ltd; Segway and the Rider Design are the registered
trademarks of Segway Inc.; The respective owners reserve the rights of their trademarks referred to in this manual.
We have attempted to include description and instruction for all the functions of the Ninebot eKickScooter at the time of
printing. However, due to constant improvement of product features and changes of design, your scooter may differ slightly
from the one shown in this document. Visit www.segway.com to download the latest user materials.
Please note that there are multiple Segway and Ninebot models with different functions, and some of the functions
mentioned herein may not applicable to your unit. The manufacturer reserves the right to change the design and
functionality of the scooter product and documentation without prior notice.
©2022 Ninebot (Beijing) Tech Co., Ltd. All rights reserved.
Legal Statement
IMPORTANT: Ninebot eKickScooter (the "product") is an o road product rather than a means for
transportation. Be aware, the user shall agree to read the entire user manual and fully understand its
content (especially the parts related to the safety riding).
1. The "Segway parties" mentioned above and below is the Manufacturer ("Ninebot") Segway Inc. ("Segway" ) and their
affiliates (including but not limited to their parent company, subsidiary, affiliated companies, predecessor, subsequent
company, administrators, succcessors, assigns, officers, directors, managers, employees, members, shareholders, and
agents, attorneys, insurers).
2. This product can be dangerous to a user, other persons, and property in proximity to that. The user shall assume all the
risks and losses in connection with the product (especially for those related to and/or arising out of violation of the
instructions about warnings and caution statements). Such risks include but not limited to loss of control, failure of the
product, and/or collusion) The consequences for such an incident can be severe, including but not limited to injuries,
bodily injuries, death, and/or damages to property. Segway parties shall not be liable for any claim, liability, and loss
related to such consequences if it is due to the user's assumption of risk.
3. The product is a means of entertainment and play. The user may not have the necessary and sufficient experience and
skills to ride it, especially in complex environments and/or undesirable road. Such risk may increase if the user has
physical and/or mental impairment or disability. Such risk may also increase if the user is not sufficiently familiar with
the functions, features and performance of the product. Thus, new users shall learn and practice how to use this product
properly and safely.
4. The user shall regularly and periodically, as the circumstance requires, inspect and maintain the product. The user shall
also conduct reasonable examination and inspection of the product every time before riding it. For instance, every time
14