MCC ABW-VAY-70P Manuel D'instructions page 9

All manuals and user guides at all-guides.com
WARNING!
In order to avoid a hazard
due to inadvertent resetting of the thermal
cut-out, this appliance must not be supplied
through an external switching device, such
as a timer, or connected to a circuit that is
regularly switched on and off by the utility.
WARNING!
Ensure that any exhaust
emissions are not in the vicinity of air
intakes.
WARNING!
Always switch off the mains
disconnecting switch when leaving the
machine unattended.
Warning symbol: Machine not suitable for
connection to the potable water mains.
WARNING!
The machine is intended to
be used at a temperature above o degree.
(Only for machine with power cord of
H05VV-F).
WARNING!
To ensure the machine
safety, please only use original spare parts
(including nozzle) from the manufacturer or
approved by the manufacturer. Do not use
the machine before you changed them if
they are damaged.
WARNING!
Be care of the danger of the
kickback force on the spray assembly when
opening the trigger gun and grasp the gun
with hands firmly.
WARNING!
When the machine is moving
and installing, the machine must be in flat.
When moving the machine, pulling the
handle to move it.
WARNING!
Connect to the water supply.
The machines are not suitable for
connection to potable water mains.
Connect the machine to the water supply. (It
can be a water container).
Make sure the inlet water pressure keeps
between 0.01MPa and 0.4MPa.
The inlet pipe should at least 5 M long. Do
not use the pipe if the pipe is damaged.
If you want connect this machine to portable
water mains, you must install a backflow
preventer in the water pipe to prevent dirty
water flow back to the drinking water
system. The backflow preventer shall
comply with EN 60335-2-79 ANNEX AA.
WARNING!
Disconnect from the
electrical power supply before carrying out
user maintenance.
If the supply cord is damaged, it must be
replaced by the manufacturer, its service
agent or similarly qualified persons in order
to avoid a hazard.
7