All manuals and user guides at all-guides.com
Advise: A too low battery capacity might be responsible for the fact that the operation distance to the radio
remote control of the PC is impaired respectively signs are let out sporadically when writing.
4.2 Meaning of status LEDs
•
Pairing-LED
Indicates, that the keyboard is in Pairing-Mode with the USB receiver, in other words
the manual implementation of a new synchronisation to achieve a shared "radio chan-
nel" (ID). The light goes out after successful synchronisation.
•
Transmitting-LED
Indicates, that during keyboard or trackball operation all input information have been
sent out successfully per radio transmission from the keyboard.
•
Battery Low-LED
Indicates, that the load condition of the batteries is below 2.2 Volt. It fl ashes until a new
battery has been inserted or until the battery has been completely used up. Besides
that it fl ashes only when the keyboard is not in Sleep-Mode (idle state).
4.3 Special operation modes of the keyboard
•
Sleep-Mode
When there is no input on your keyboard or trackball for over 30 min, the keyboard automatically turns into
sleep mode (idle state) to save battery capacity.
•
Wake up-Mode
To activate the keyboard from sleep mode press any key on your keypad (not the left or right mouse button
or the trackball!).
•
Reconnect-Mode
The keyboard automatically connects to the USB receiver after being reactivated. Depending on the en-
vironmental conditions, the radio transmission for reconnecting needs between less than 1 second to up
to a few minutes.
4.4 Keys with double functions
The layout of this keyboard is a special space-saving design with the same virtual numeric keypad as used
by notebooks.
11
Virtual numeric keypad
Version 1.0 (2011/04/28)
...touch the difference
●
© 2011 by MaxPoint Handelsges. mbH