Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
3.3 Keyboard installation
•
Recommended requirement is the successful installation of the USB receiver under point 3.2
•
If you haven't done yet, remove the covering of the battery case on
the bottom of your keyboard. Install the included batteries of type
AAA 1.5 V considering the right polarity in the battery case (see
picture).
•
Switch ON the on/off sliding switch on keyboard's back side!
•
The USB receiver and the keyboard are factory-made already synchronised on the same channel. Nor-
mally you have not to make a new-synchronisation (as described under point 3.4).
•
Now you can check this by pressing any key of your keyboard.
If you press the Windows key, for instance, the Windows Pop-up
menu down left on your screen has to open. If so, your wireless key-
board is working correctly now. If not, please synchronise the USB
receiver and the keyboard again like described under point 3.4.
Advise: Should the functionality be infl uenced by other users applying their wireless keyboard close-by,
make a new-synchronisation as described under point 3.4.
3.4 New-synchronisation of the radio channel
KSK-5210 RF is equipped with the newest radio technology allowing in the easiest manner to make a new-
synchronisation.
•
The process of synchronisation can take up to 10 seconds
and is signalised by the fl ashing of the PAIRING-LED (middle
LED on front side of the keyboard), which turns off after suc-
cessful synchronisation. The keyboard is now ready for use
and functional.
•
Check now the functionality of the keyboard as described under point 3.3.
Advise:
One further benefi t of this newest radio technology is the availability of a large number of possible, inde-
pendent from each other „radio channels" (16 channels *2
tions or even IDs) to ensure a trouble-free and secured operation of several wireless keyboards in one
room respectively in a transmitting/receiving sector of approx. 7 m.
9
•
In contrast to conventional or older wireless keyboards on
the market this keyboard only requires you to press the PAI-
RING key on the back side only 1 time, whereby the new
synchronisation signal is transmitted to the USB receiver.
Thereby a complete, extremely comfortable handling from
the user's location (e.g. a sofa) is possible without the need
to stand up for pressing the synchronisation key of the re-
ceiver, which is usually located in the USB port of the PC.
Bit = 68.719.476.736 possible radio connec-
32
Version 1.0 (2011/04/28)
...touch the difference
2 x
●
© 2011 by MaxPoint Handelsges. mbH
Publicité
