Philips HC8390 Mode D'emploi page 5

XP SBC HC 8390/00-1.2
General information
Easy transmission
The FM headphone is able to receive signals
from the transmitter, even through barriers
such as doors, walls and windows.
Multiple headphones with one
transmitter
An additional number of headphones
and/or wireless speakers can be used with a
single transmitter if they:
- operate in the 864 MHz band
- can detect a 19 kHz pilot tone.
Please consult the appliance's electrical
specification sheets for confirmation on
compatibility.
Kit contents
This FM headphone system consists of the
following accessories:
1 x SBC HC8392 FM transmitter
1 x SBC HC8395 FM headphone
1 x SBC CS030/00 12Volt / 200mA AC/DC
adapter (for UK: SBC CS030/05 12 Volt/
200 mA AC/DC adapter)
2 x rechargeable batteries LR03/AAA
(NiMH), 550 mAh
1 x 3.5 mm plug to 6.3 mm stereo adapter
plug
1 x antenna tube
19-06-2001 12:37 Pagina 5
All manuals and user guides at all-guides.com
1 Power indicator – lights up when audio
2 Recharging indicator – the green LED
3 Recharging compartment – just place
4 DC power – connect to the 12 Volt/
5 3.5 mm stereo headphone audio
6 Channel switch – select one of
7 Controls plate
8 Power indication – lights up when in use.
9 Power On/Off – slide the switch to the
10 Battery compartment – open the lid,
11 Volume – adjust volume to your desired
12 Tuning – turn the tuning knob until the
Controls
Transmitter (figure 1)
signals are detected at the audio input.
lights up during recharging.Completely flat
batteries will be fully charged after about
16 hours.
the batteries in the transmitter's battery
compartment.The green LED lights up
during recharging.
200 mA AC/DC adapter
input – connects your FM transmitter to
an audio source
2 channels for best reception.We advise
you to select channel 1 as a first option.
Headphone (figure 2)
on or off position to switch the headphone
on/off.
take out the batteries and put them in the
transmitter's recharging compartment for
recharging.
listening level.
signal is at its clearest.
5