All manuals and user guides at all-guides.com
Please read these instructions carefully
and keep for future reference.
Shot of Steam Button
for removing wrinkles
Spray Button to moisten linen
Water tank filler
cover
Steam control
Anti-calc valve
To be cleaned once
per month
Spray
Water tank maximum fill line
Sole plate
Do not exceed this limit
What water to use ?
Your appliance has been designed to function with tap water. However, it is necessary to
operate the Self-Clean function regularly in order to eliminate hard water deposits. If
your water is very hard (check with your water authority), it is possible to mix tap water
with store-bought demineralized water in the following proportions :
50% tap water, 50% demineralized water.
Types of water not to use :
Heat concentrates the elements contained in water during evaporation. The types of
water listed below contain organic waste or mineral elements that can cause spitting,
brown staining, or premature wear of the appliance: water from clothes dryers, scented
or softened water, water from refrigerators, batteries, or air conditioners, pure distilled
water, or rain water.
SUPERGLIDE
(depending on model)
Auto-Stop safety warning light
(depending on model)
Thermostat indicator light.
Goes out when the temperature has
been reached.
Thermostat control
For choosing the ironing temperature
Warning ! Remove the sole plate protector before
heating up the iron (depending on the model).
Warning !
Before using your iron with the steam function
for the first time, we recommend that you
operate it in horizontal position for a few
moments, away from your linen, ie press several
times on the shot of steam button.
During the first few uses, a harmless odour and
smoke may be given off.This has no effect on
the use of the iron and will disappear quickly.
Electric power
cord