Télécharger Imprimer la page

MSI G52-72701X1 Manuel D'instructions page 13

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 19
MSI Reminds You...
Please do not fold the serial ATA cable in a 90-degree angle, which will cause the loss of data
during transmission.
CD-In Connector: CD1
The connector is for CD-ROM audio connector.
Fan Power Connectors: CPUFAN1/SYSFAN1
The CPUFAN1 (processor fan) and SYSFAN1 (system fan) support system
cooling fan with +12V. When connecting the wire to the connectors, always take note that the red
wire is the positive and should be connected to the +12V, the black wire is Ground and should be
connected to GND. If the mainboard has a System Hardware Monitor chipset on-board, you must
use a specially designed fan with speed sensor to take advantage of the CPU fan control.
MSI Reminds You...
Always consult the vendors for proper CPU cooling fan.
Chassis Intrusion Switch Connector: JCI1
This connector connects to a 2-pin chassis switch. If the chassis is opened,
the switch will be short. The system will record this status and show a warning
message on the screen. To clear the warning, you must enter the BIOS utility and clear the
record.
Front Panel Connectors: JFP1/JFP2
The mainboard provides two front panel connectors for electrical
connection to the front panel switches and LEDs. JFP1 is compliant
with Intel Front Panel I/O Connectivity Design Guide.
Front Panel Audio Connector: JAUD1
The front panel audio connector allows you to
connect to the front panel audio and is
compliant with Intel ® Front Panel I/O
Connectivity Design Guide.
Front USB Connector: USB1/USB2
The mainboard provides two standard USB 2.0 pin headers
USB1&USB2. USB2.0 technology increases data transfer
rate up to a maximum throughput of 480Mbps, which is 40
All manuals and user guides at all-guides.com
(1) PORT 1L
7
L
GND
R
9
10
Switch
S ENS E1 _RETURN
Key
PRES ENCE#
(2) GND
PO RT 1 R
S ENS E_SEND
PO RT 2 R
USB1-
(2)VCC
(1)VCC
USB0-
GND
+12V
NC
GND
CINTRU
Reset
HDD
Speaker
Switch
LED
1
2
2
1
Power
Power
Power
LED
LED
JFP2
JFP1
S ENS E2 _RETURN(1 0)
PO RT 2 L(9)
USB1+
GND
USB0C(10)
Key(9)
GND
USB0+
8
7

Publicité

loading

Ce manuel est également adapté pour:

Ms-7270