MSI 760GM-P34 FX Serie Manuel D'installation page 22

JuSB_PW, JuSB_PW2: uSB power Jumper
these jumpers are used to select uSB ports powered by VCC5 or 5VSB. Set to
5VSB if you want the uSB ports provide power in standby mode.
JuSB_PW
(for rear uSB
2.0 ports)
JuSB_PW2
(for on-board
uSB connec-
tors)
iMPortANt
if you set the jumper to 5VSB, the power supply must be able to provide at least
2A currents.
22
All manuals and user guides at all-guides.com
1
1
keep uSB
power to VCC5
1 1
keep uSB
power to VCC5
1
keep uSB
power to 5VSB
1
keep uSB
power to 5VSB