MSI 760GM-P34 FX Serie Manuel D'installation page 21

All manuals and user guides at all-guides.com
MS-7641
JCi: Chassis intrusion Connector
this connector connects to the chassis intrusion switch cable. if the computer
case is opened, the chassis intrusion mechanism will be activated. the system
will record this intrusion and a warning message will flash on screen. to clear the
warning, you must enter the BioS utility and clear the record.
JLPt: Parallel Port header
this connector is used to connect an optional parallel port bracket. the parallel
port is a standard printer port that supports enhanced Parallel Port (ePP) and
extended Capabilities Parallel Port (eCP) mode.
JBAt: Clear CMoS Jumper
there is CMoS rAM onboard that is external powered from a battery located on
the mainboard to save system configuration data. With the CMoS rAM, the sys-
tem can automatically boot into the operating system (oS) every time it is turned
on. if you want to clear the system configuration, set the jumpers to clear the
CMoS rAM.
JBAt
1
1
keep data Clear data
iMPortANt
you can clear the CMoS rAM by shorting this jumper while the system is off.
Afterwards, open the jumper . do not clear the CMoS rAM while the system is on
because it will damage the mainboard.
2