Panasonic KX-TS710EX Manuel D'instructions page 9

All manuals and user guides at all-guides.com
TS710EX(e).book Page 9 Wednesday, May 21, 2008 10:37 AM
Troubleshooting
Problem Cause/solution
There is no sound from the L The application software you want to use with
speaker/receiver.
L The USB cable is not connected properly to the
L Make sure that your computer audio device's
L The unit may not be selected as the audio
L The unit may not work properly depending on
Useful Information
the unit was started before installing the unit.
Please restart the application software.
unit and your computer. Connect it.
playback volume is set to the maximum and that
mute mode is not selected.
device of your computer. Please confirm the
setting of your computer as follows.
Example: Windows XP
1
Click "start", then click "Control Panel".
2
Click "Sounds, Speech, and Audio Devices".
i Click "Sounds and Audio Devices". i
Click "Audio" tab.
3
Make sure that the default device of "Sound
playback" is "Panasonic KX-TS710".
the power supply of your computer's USB port. If
this is the case and your computer has multiple
USB ports, we recommend that you try other
USB ports.
9