Panasonic EW1313 Manuel D'instructions page 14

BLACK
3. Stand the main unit in the
charger.
4. While pressing the nozzle
release button, remove the
nozzle from the main unit and
place it on the nozzle stand.
Cleaning
1. Pull out the water tank downwards.
2. Clean with water.
• Remove the identification ring and clean with water.
• Do not wash with hot water exceeding 50 °C.
14
PANASONIC : SEW131330303_OL_PROOF2_NUK_26/5/2020
EW1313_EU.indb 14
PANASONIC : SEW131330303_ORIGINAL_PROOF1_NUK_26/5/2020
• If using a detergent, use one suitable for dishwashing.
Rinse well with water to ensure no detergent remains
after cleaning.
• Wipe away moisture with a towel and leave to dry in
a well-ventilated area.
Scrub the filter at the tip of the
suction hose lightly with a soft
brush.
3. Wipe away the water with a towel etc. and dry.
4. Align and slide the water tank along the
groove and install it securely.
Use a cloth to wipe away the stains on
the charger.
• Never use thinners, benzine, or alcohol
since it may cause malfunction or
cracking/discoloration of the parts.
• Do not clean the charger with water.
• About once every six months wipe the
prongs of the power plug with a dry cloth.
SIZE : 182x128 mm.
ACROBAT OK
2020/05/22 18:41:41