Cuckoo CBT-I1030RW Mode D'emploi page 17

All parts throughout the manual need to be formatted the same--either Sentence Case or all lowercase
Plug in the power cord to an available power outlet.
If the power supply lamp is not turned on after plugging in the power cord,
press any button on the control panel found on the main frame.
When power is supplied to the main frame, do not turn or move the main
frame as this may cause product malfunction.
With your right hand in contact with the Seating Sensor Unit (with
the Seating Sensor Unit operating), press the Clean or the Bidet
button to check if the Nozzle works and water is sprayed. Here,
Cover the clean nozzle with your left hand to prevent
water from splashing.
ChECkliST bEfOrE uSE
AFTER INSTALLATION
17