Cuckoo CBT-I1030RW Mode D'emploi page 13

Order of installation (CBT-IS1131REW, CBT-IS1131RRW)
Use only with a properly grounded 120V AC power outlet with a rating of at least 15A.
Do not plug in the power cord before and while installing.
Separate the original seat from the toilet.
Unfasten the fixing nuts (2) on left and right sides and then separate the
original seat and the seat cover.
Store the detached original seat, seat cover and fixing nuts in a secure
place in case of moving or re-installation in the future.
Before installing the bidet, check the size of the
toilet (porcelain).
Turn the water supply valve clockwise to lock it and then
separate the water supply hose on the toilet side
connected to the water supply valve.
Install a T-valve from where the water supply
hose has been separated.
HOW TO INSTALL
Toilet
seat
Nut
Toilet
Rubber washer
Water supply hose
on the toilet side
Water supply valve
13