Cuckoo CBT-I1030RW Mode D'emploi page 12

Turn the water supply valve clockwise to lock, then separate
the toilet hose using a spanner.
Set the old toilet lid and nuts aside for future re-installation.
Install the T-valve as shown in the image.
Install the body.
Place the main frame fixing plate on the toilet and affix the
fixing bolts on the main frame fixing plate as shown
in the image.
The location at which the Main Frame Fixing Plate is
secured determines the location where the product is
installed. Considering the size of the product and toilet,
fix the Main Frame Fixing Plate in a suitable position.
If the position of Main Frame Fixing Plate is improper,
the seat will not be properly positioned in relation
to the toilet.
12
Use only with a properly grounded 120V AC power outlet with a rating of at least 15A.
Do not plug in the power cord before and while installing.
Fixing bolts
Fixing washer
Fixing brackets
Main frame fixing plate
Rubber nut
Button