auna Arizona Sing Mode D'emploi page 32

EN
32
All manuals and user guides at all-guides.com
Using a BT Device
1. Connect the unit as described previously. Press the POWER button (1) on
the front panel to turn the unit on.
2. Repeatedly press MODE button (2) on the front panel to select BT. "bt"
will appear in the LED display and BT indicator on the front panel will
flash blue. The unit automatically searches for and pairs a previously
paired BT device (if previously paired). If no previously paired devices
are present, connect as shown in the next step.
NOTE: You can also long press the PAIR button (9) on the front panel to
disconnect any paired devices in order to pair another device.
3. Turn on your device's BT option in settings to search for a discoverable
device with a BT signal. Select "Arizona Sing" from the device results on
the BT menu.
Note: Also refer to the user manual of your BT device for detailed
instructions.
4. The BT indicator will light solid blue and a chime will sound.
NOTES:
• If your BT prompts you for a pass code during the pairing process,
please enter "0000" to connect.
• On some BT devices, once pairing is complete, select your BT device as
"Use as Audio Device" or similar.
• If connection is lost after successful pairing, check to make sure the
distance between speaker and BT enabled device does not exceed
10 meters (30 feet).
5. Start playback of your BT device. Press the PAIR button (9) on the front
panel during playback to pause the song.
6. Advance or go back one track by pressing the "SKIP- (12) and SKIP+ (11)
buttons on the front panel.
Using recording function
1. To record your singing as well as the music, press the RECORD button
(3) on the front panel, the POWER indicator will flash green and then
turn solid green, the recording will begin.
2. When done recording, press the RECORD button (3) again, the POWER
indicator will turn off.
3. The recorded audio file will be recorded onto the USB drive.