Eterna Tangaroa Moonphase Mode D'emploi page 9

All manuals and user guides at all-guides.com
3 . C H R O N O G R A P H F U N C T I O N S
With the chronograph you can measure times of up to
12 hours.
3.1 STARTING THE CHRONOGRAPH
Pressing push-button
seconds hand 11. It completes a full turn of the dial in
60 seconds. The minute counter
chronograph hour counter
elapsed since starting.
3.2 STOPPING THE CHRONOGRAPH
Pressing push-button
central seconds hand
hands 12 and 13
3.3 RESETTING THE CHRONOGRAPH
Pressing push-button
dying it for a new timing operation.
3.4 SUCCESSIVE TIMING OPERATIONS (LAP TIMES)
To measure successive times, you need only activate and
pause the chronograph at will using the push-button
at 2 o'clock. The corresponding hands are not reset, but
restart directly from their stop position. The chrono-
graph is reset using the push-button
A. starts the chronograph central
13 at 6 o'clock record the time
A. again stops the chronograph
11 and the chronograph counter
, enabling you to read the elapsed time.
B. resets the chronograph, rea-
8 8
12 at 12 o'clock and the
B. at 4 o'clock.
A.