Publicité
Les langues disponibles
Les langues disponibles
6
All manuals and user guides at all-guides.com
5. Pairing with a phone or other device
Before you use your headphone you must pair it up with a mobile phone
or/and another Bluetooth enabled device.
- Switch on your headphones
- Put the headphone into pairing mode: when the headphone is turned off,
press and hold the mFB until the indicator light is blinking blue/red.
- Set your mobile phone or other device to 'discover' the headphone
following your phone's instruction guide.
- Your phone will find the "BeeWi BBH100/BBH101" and ask if you want
to pair with it. Accept and confirm with the passkey or PIN = 0000 (4
zeros). Your phone o r other device will confirm when pairing is complete.
After successful connecting, the blue light of the headphone blinks twice
every 4 seconds. In case of unsuccessful pairing repeat steps 1 to 3. To
connect another device, repeat the process after switching off the first
device.
6. Connection et use
The last phone paired will always reconnect when switching on the
headphones. If connection is lost, it is possible to manually reconnect by
pressing (
). You can use (
) key for answering, initiate or end a call,
(
) key to play or pause music and volume wheel to adjust sound volume
and change tracks. For more information, see section 7.
Note :
In case the mobile phone is connected in both HFP Hands free
profile and A2DP stereo music profile, the hands-free profile will be
prioritized when a call is received or sent. As soon as the call ends, the
music will start again automatically.
Note :
You can connect two devices at the same time to enjoy hands-
free communication and music streaming, only if they are using different
profiles (one is using HFP, the other AD2P). When one profile is being
used by one device, it cannot be used by another.
After having paired the headphone with your mobile phone, you can pair
it with your music player or PC. The music player will use audio streaming
profiles (A2DP and AVRCP), so you can use music playback and remote
control features and the phone will use the hands-free profiles so you can
use the phone features.
Note :
In order to save the battery, the headphone will automatically
switch off after 15 minutes of inactivity.
ENGLISH
Publicité
