Urmet 1093 Guide Rapide page 5

ENGLISH
Specifications
1- Compliant with IEEE802.3at/af standard
2- CE, RoHS certificate
Description
1093/833 (PoE Switch) supply power to IP cameras through Cat5 cables, provide 16
x10/100 Mbps standard PoE ports ,2 Gigabit uplink ports and 1 gigabits combo (SFP)
uplink port
1093/833 is a 16-port unmanaged POE (Power-over-Ethernet) Ethernet switch, it
supports 16 POE ports which are classified as power source equipment (PSE).
1093/833 UTP CAT5e to transmit data and power at the same time from a network
node. The port is not only for 10/100 MBPS connection, but which POE port can also
provide IEEE802.3at standard of power upply. By testing, 1093/833 suit for 802.3af/at
terminal equipment supply after classifying, without fear of damaging the private
standard POE or non POE equipment, and single port can provide up to 25.5watts of
power. 1093/833 greatly reduce the additional power wiring cost of the users, wireless
LAN access points, video surveillance camera equipment and so on, providing users
with higher flexibility and mobility.
Advanced self-adaptive algorithm only supply PD terminal equipment with power, so
without fear of damaging to private standard POE or non POE equipment. It will stop
supplying power when POE equipment isn't connected. 1093/833 with terse and
reliable design, identify automatically the requirement of POE, speed, duplex, and
using Auto Uplink TM cable types.
Features and Advantages
Support power supply to wireless AP and network surveillance cameras through
Cat5 cable
1~16 port support standard IEEE802.3af power supply
Comply with IEEE 802.3 10 Base-T and IEEE 802.3u 100Base-TX standard
Flow control:IEEE 802.3X standard full-duplex and Backpressure standard half-
duplex
10/100Mbps auto-adaptive RJ45 port