Symptom
The Unswitched LED
on front panel is Off.
The Switched LED is Off.
18
All manuals and user guides at all-guides.com
TROUBLESHOOTING
Possible Cause
The PowerCenter is not plugged in.
The PowerCenter is plugged in,
but the outlet is not receiving power.
You are using the Switched Outlet
Remote Turn-On feature and haven't
plugged the plug into the component
you wish to use to activate the
Remote Turn-On.
The component remote control
you are using to power the Remote
turn-on has a dead battery.
The component you wish to use
to activate the Remote Turn-On
isn't plugged into a properly grounded
100 volt (nominal) outlet.
Remedy
• Plug the PowerCenter into a properly
grounded 120 volts (nominal) outlet
and make sure it is on.
• Plug the plug into the component
you wish to use to activate
the Remote Turn-On.
• Replace the battery powering
the component remote control.
• Plug the component into a properly
grounded 120 volt (nominal) outlet.
• Plug the PowerCenter into a properly
grounded 120 volts (nominal) outlet.