Mitsubishi Electric MRCH1 Manuel D'utilisation page 33

In case of difficulty
Indoor unit does
not respond
Screen displays
"No Signal"
All manuals and user guides at all-guides.com
Français : voir la page 34 • Español: vea la página 68
• Check circuit breaker and reset if necessary.
• Make sure power switch at equipment is on.
• Wait 5 minutes for the system to respond.
Remote contoller has lost radio contact with the wireless network (usually
because of a power outage). To restore power:
• Check circuit breaker and reset if necessary.
• Make sure power switch at indoor unit is on.
After power is restored, the remote controller will automatically restore
wireless communication within a few minutes.
31 69-2427EFS—01