Klarstein 10030272 Mode D'emploi page 19

For models with glass (10030273)
1. The cooker hood should be placed at a distance of 65-75cm (26-30inch) from the cooking surface for the
best effect. See Pic 1.
2. Install the hook on a suitable place once the installation height is fixed, and keep it in line. The fixed position
of the inside chimney bracket is the place of chimney.
3. Fix the extensible pipe according to the lead direction and way, and then put the cooker hood on the hook.
See pic 3.
4. Put the glass according to the lead direction and way on the cooker hood, and then use the screws to fix the
glass, also lead the extensible pipe outside of the room, meanwhile adjust the height of the inside chimney
to the position of the inside chimney bracket and fix on it by screw , here should be sure the inside chimney
can be flexed freely. See Pic 4.
5. Put the two chimneys together onto the cooker hood body, meanwhile adjust the height of the inside chim-
ney into the suitable height, and fix the inside chimney to the inside chimney bracket by screw. Finally, fix
the body with safety screw. See Pic 5.
Note: The two safety vents are positioned on the back casing, with diameter of 6mm.
19
All manuals and user guides at all-guides.com