Publicité
Les langues disponibles
Les langues disponibles
• Do not abuse the cord.
tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged cords increase the
risk of electric shock.
• When operating a power tool outside, use an extension cord suitable
for outdoor use.
shock.
• Do not use AC only rated tools with a DC power supply.
appear to work. The electrical components of the AC rated tool are likely to fail and rate a hazard
to the operator.
PERSONAL SAFETY
• Stay alert,
watch what you are doing and use common sense when operating a power tool.
Do not use tool while tired or under the influence of drugs, alcohol, or medication. A moment of
inattention while operating power tools may result in serious personal injury.
• Use safety equipment.
mask, non-skid safety shoes, hard hat, or hearing protection for appropriate conditions will reduce
personal injuries.
• Dress properly.
away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts. Air
vents may cover moving parts and should be avoided.
• Avoid accidental starting.
Carrying power tool with your finger on the switch or plugging in power tools that have the switch
on invites accidents.
• Remove any adjusting keys or wrenches before turning the power
tool on.
A wrench or key that is left attached to a rotating part of the tool may result in
personal injury.
• Do not overreach.
cause an injury in an unexpected situation
• If devices are provided for connection of dust extraction and
collection facilities, ensure these are connected and properly used.
Use of these devices can reduce dust related hazards.
• Do not use a ladder or unstable support.
enables better control of the tool in unexpected situations.
• Keep tool handles dry, clean and free from oil and grease.
handles cannot safely control the tool.
TOOL USE AND CARE
• Secure the work piece.
stable platform. Holding the work piece by hand or against your body is unstable and may lead to
loss of control.
• Do not force the power tool.
rate for which it is designed. Forcing the tool could possibly damage the tool and may result in
personal injury.
English
All manuals and user guides at all-guides.com
Never use the cord for carrying, pulling or unplugging the power
These cords are rated for outdoor use and reduce the risk of electric
Always wear eye protection. Safety equipment such as dust
Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves
Ensure the switch is in the off position before plugging in.
Maintain proper footing and balance at all times. Loss of balance can
.
Use clamp or other practical way to hold the work piece to a
The tool will perform the job better and safer at the feed
3
While the tool may
Stable footing on a solid surface
Slippery
Publicité
