Publicité
Les langues disponibles
Les langues disponibles
4. "A steady RED light after inserting the battery" indicates the battery is too warm to be charged. Once
the battery has cooled, the RED light will go off and the flashing GREEN light will illuminate indicating
the charge cycle has begun.
5. "A RED Light Flashing after inserting the battery" indicates that (1) battery pack has a bad
connection with charger, press the battery into the charging slot a little more to make sure the battery
is fully engaged with charger. OR (2) the battery is defective and needs to be replaced. Please
dispose of the defective battery in the method explained in this manual.
6. After charging, unplug the charger from the power source.
Tips for extending Battery life: Do not store batteries completely discharged. Charge them fully
before storing.
WARNiNG:
Always be sure that the tool is switched off before insertion or
removal of the battery pack.
INSTALLING OR REMOVING BATTERY PACK
• To remove the battery pack, withdraw it from the tool while depressing the tabs on
both sides of the pack.
• To insert the battery pack, align the ribs on the top of the battery with the grooves in the
housing and slide it into place. Always insert it all the way until it locks in place with a little click.
Lightly pull on the battery pack to ensure it is locked into place and will not accidentally fall out of the
drill, causing an injury.
• Do not use force when inserting the battery pack. If the battery does not slide in
easily, it is not being inserted correctly.
IMPORTANT BATTERY INFORMATION: DISPOSING THE BATTERY PACK
• Your batteries are LITHIUM-ION rechargeable batteries. Certain Local, State and
Federal laws prohibit disposal of these batteries in ordinary trash.
• Consult your local waste authorities for your disposal/recycling options.
• More information regarding battery disposal in U.S. and Canada is available at;
http://www.rbrc.org/index.html, or by calling 1-800-822-8837 (1-800-8BATTERY).
TWO-YEAR WARRANTY
This product is warranted free from defects in material and workmanship for 2 years after date of
purchase. This limited warranty does not cover normal wear and tear or damage from neglect or accident.
The original purchaser is covered by this warranty and it is not transferable. Prior to returning your tool to
store location of purchase, please call Toll-Free Help Line for possible solutions. THIS PRODUCT IS NOT
WARRANTED IF USED FOR INDUSTRIAL OR COMMERCIAL PURPOSES.
TOLL-FREE HELP LiNE
For questions about this or any other PowerSmith MagLithion™ product, please call Toll-Free:
888-552-8665
. Or visit our website:
©Richpower Industries, Inc. All Rights reserved
Richpower Industries, Inc.
736 Hampton Road
Williamston, SC 29697
English
All manuals and user guides at all-guides.com
www.maglithion.com
12
Printed in China, on recycled paper
Publicité
