Winix T1 Mode D'emploi page 14

All manuals and user guides at all-guides.com
MODES OF OPERATION
On the Home Screen the following is displayed
Mode, Fan Speed, PlasmaWave®, Air Quality, Local Climate and Weather
1. Auto Mode
Enables Auto operation based on the unit's air quality Smart Sensors.
Select Auto from the Home Screen.
①
In Auto mode, PlasmaWave® is enabled.
When in Auto Mode the fan speed is automatically adjusted according to
the indoor air quality. As the indoor air quality improves, the fan speed will
automatically be reduced. If the indoor air quality decreases the fan speed will
automatically be increased.
2. Manual Mode (setting fan speed)
Select Manual from the Home Screen.
①
The unit will be switched to Manual mode and will
only change fan speeds if switched.
In Menu, select Fan Speed and choose the speed at
which you would like the unit to run.
English
14
T1