OHAUS RANGER 3000 Manuel D'instructions page 6

RS232 Interface
OPERATION
RS232 OUTPUT
With the Adapter installed the balance will operate in one of the following three ways:

Auto Print = off, Stable = on or off
Pressing PRINT will send the display data.
If Stable is set to On, the balance will wait for a stable reading before sending data.

Auto Print = not off, Stable = on or off
The balance will automatically send data based on the settings in the Menu.
If Stable is set to On, only stable values will be sent.
Data sent from the Interface is in standard ASCII format terminated with a [CRLF] (carriage return-
line feed). The output format is as follows:
[weight] 9 characters (right justified)
[space] 1 character
[unit] 5 characters max (left justified)
[space] 1 character
[stability indicator] 1 character
[space] 1 character
[G/N] 1 character
Output example:
Weigh Mode Printout
11.11 kg NET
12.34 kg G
11.11 kg NET
1.23 kg T
MODE: WEIGH
<no line printed>
RS232 INPUT
The balance will respond to various commands sent via the interface adapter. Terminate the
following commands with [CRLF].
All manuals and user guides at all-guides.com
"?" when unstable, blank when stable
Description Comment
Result line If Printx  Content  Result is ON
Gross value If Printx  Content  Gross is ON and a tare value is
line entered
Net value If Printx  Content  Net is ON and a tare value is
line entered
Tare value If Printx  Content  Tare is ON and a tare value is
line entered
Mode line If Printx  Content  Application Mode is ON
Information
If Printx  Content  Into is ON
line
EN-3