Pogo TSR/500 Mode D'emploi page 19

5) Press the [SELECT] Soft Key until your device
turns off and then press [VERIFY] Soft Key.
Your selected device will turn on again.
6. You will see a second page which allows you
to test for compatibility; in this case, it is the [VOL-],
[MUTE] and [VOL+] Soft Keys.
If your device works properly, press [SAVE]
to store the programming code.
If your device doesn't work properly,
press [BACK] to use the next code
and repeat step 5 to step 6 until all Soft Keys
work properly.
7) When the [SAVE] Soft Key pressed,
the remote will save the settings and
return to normal operation mode
(for example, AUDIO operation mode).
If you find that you have saved the wrong code,
repeat steps 1 – 7 above. You will start at the next
available code for that device.
All manuals and user guides at all-guides.com
TSR-500 User Manual
19