Pogo TSR/500 Mode D'emploi page 15

Note: all POWER will only function if your remote is programmed
See PROGRAM CODE in the next section. Press SETUP to return
to Configuration Mode.
The diagram shows AUDIO, CBL, TV, AND AUX 1,
AUX 3 AND AUX 6 selected for all Power.
3-5. Default Setting
This setting returns the remote to its intial state before user programing.
1) To delete the learned data for a specific device
. Press the [LEARNING-DEVICE] Soft Key.
. Select the Device you wish to erase the learned data
Caution: If you press [CONFIRM], You will lose all learned data for the
selected device.
2) To delete all learned data for all devices:
. Press the [LEARNING-ALL] Soft Key.
All manuals and user guides at all-guides.com
TSR-500 User Manual
15