Publicité
Les langues disponibles
Les langues disponibles
Peel the backing off of the included
wire clip.
Pull zip-tie to tighten and secure
cord in place.
Place Ethernet cord into wire clip,
as shown above, and press and hold
wire clip down for ten seconds for
proper adhesion.
Cut excess length off of zip-tie.
Feed included zip-tie through wire
clip and behind cord, as shown
above.
Screw left pedal onto crank arm
counterclockwise.
Use double sided
wrench to ensure pedal is firmly
seated against crank arm.
17
1
Publicité
