Echelon EX-7S Manuel D'instructions page 16

Carefully feed excess wires into
handlebar post and slide screen
mount into handlebar post. Secure
with tablet mount post bolts and
flat washers.
Remove the four preinstalled screws
and set to the side.
NOTE: WE RECOMMEND HAVING HELP WITH
TABLET INSTALLATION.
16
6
Place handlebars onto handlebar
post. Secure with handlebar
adjustment knob and washer.
Ensure the washer is place on the
bolt of the adjustment knob before
installing.
Flip mount around to face away
from Connect bike. Hold tablet up
to mount and hand screw all four
screws into tablet. Use screwdriver
end of hex key to tighten.
Place and hold water bottle holder
onto post and secure with two
screws with screwdriver end of
hex key.
Install power cord into DC port, USB
cord into USB port closest to DC
port, and Ethernet cord.