Publicité
Les langues disponibles
Les langues disponibles
7.
If the supply cord is damaged, it must be replaced by a special
cord available from the manufacturer or its service agent.
8.
Never turn the machine upside down or tilt it more than 45 .
9.
Thermostat has been adjusted. No need to adjust it by yourself.
When the machine is below freezing and blocked by ice, the
cooling switch must be turned off for 4 hours before turning
it on again and resuming operation.
10.
Please wait 3 minutes after turning off the power switch
before restarting the machine.
TROUBLESHOOTING
Please check the following before having the machine repaired.
PROBLEM
1. Over-consump on of
No water
2. No power supply
1. Empty bo le.
No water running
2. Inlet of bo le supporter
from taps
Bo le supporter
Broken bo le.
leaking
Noisy opera on Unstable installa on.
All manuals and user guides at all-guides.com
Possible Cause
water in short me.
blocked by bo le seal.
5
SOLUTION
1. wait a moment, then water will be
available again.
2. Connect plug to socket, turn on
switch.
1. Replace it with another one.
2. Clean out wasted paper&bo le
seal, install bo le again.
Replace it with a new bo le.
Place the machine on placid &
solid surface.
Publicité
