Publicité
Les langues disponibles
Les langues disponibles
Waste electrical products should not be disposed of with
household waste. Please recycle where facilities exist. Check with
your local Authority or local store for recycling advice.
PARTS DESCRIPTION
1. Legs
2. Power switch
3. Operational panel/ display
4. On/ off button
5. Heat setting button
6. WI-FI button
7. Timer button
8. Temperature "+" button
9. Fan button
10. Remote
BEFORE THE FIRST USE
•
Turn the heater on its side and screw on the included legs with
the supplied screws.
•
Place the device on a flat stable surface and ensure a minimum
of 10 cm. free space around the device. This device is not
suitable for installation in a cabinet or for outside use.
•
When the device is turned on for the first time, a slight odour will
occur. This is normal, ensure adequate ventilation. This fragrance
is only temporary and will disappear soon.
•
Put the power cable into the socket. Note: Make sure the voltage
which is indicated on the device matches the local voltage before
connecting the device.
USE
•
Put the plug into a grounded outlet and switch on the device with
the main power switch.
•
When switched on, the operational panel will display the room
temperature.
•
The operational buttons are below the display.
•
Press power button to on/off the heater.
•
Press heat setting button to select between four modes. ( low-
level heating / mid-level heating / high-level heating and anti-frost
mode.)
•
Press Wi-Fi button to connect the device to the app.
•
Press timer button to set the device on timer.
•
Press" + " to set the temperature.
•
Press fan button to switch on/off the fan in the device.
•
Never place objects on the heater, such as clothing or towels.
Never use the heater in the bathroom or other wet areas. The air
outlets of the heater can be very hot.
Timer
•
This model is fitted with a 24hr timer set using the button on
device or by the remote control or by the app.
Instruction manual
EN
Publicité
