Base Installation - CONTINENTAL EDISON CELED75S0419B2 Guide D'utilisation

Mounting of the stand
•
1. Align the screw holes on stand and TV bottom (Figure 1)
2. Fix the stand and the screen with 6pcs provided screws. (Figure 2)
3. The rendering after installed. (Figure 3)
Disassembly of the stand
•
1. Place your TV, screen facing down, on a flat surface (such as a large
table) covered with a soft, thick cloth to avoid scratching the screen.
The lower edge of the screen should protrude from the flat surface to
allow dismantling of the feet.
2. Loose the screws between the machine and stand (Figure 2).
3. Remove the 2 stands from the machine (Figure 3).

BASE INSTALLATION

EN-16