Costway FP10227US Mode D'emploi page 7

For freestanding installation, suggest to allow 2 inches of space between
the unit's side, rear and the wall. In addition, sufficient clearance (160°)
should be maintained to allow the door to open properly and completely.
• The appliance must be correctly connected to the power supply,
115V/60Hz, certainly grounded.
The refrigerator is not designed to be installed in an outside
area such as a garage or a porch. Ambient temperatures of
below 50° or above 90° will hinder the performance of the
appliance.
12
CARE AND MAINTENANCE
* The refrigerator should be cleaned on a regular basis. (See: "HOW TO
CLEAN")
* It is necessary to have an adequate ventilation space around the
refrigerator in order to attain proper performance, dissipation of heat,
maintain efficiency, and low power consumption. Clearance of minimum 2
inches should be maintained at the rear and sides of the unit. And
especially do not obstruct the front hot air outlet frame. (See: "HOW TO
INSTALL")
* To attain proper performance, be sure to plug the appliance into a
properly grounded 115/60 Hz outlet.
* Do not modify the power cord under any circumstance to allow the unit
to be plugged into a non-grounded outlet. To avoid heat damage to the
power cord, please ensure that it does not come in proximity or in direct
contact with the compressor of the refrigerator.
* Please avoid installing the refrigerator in a location where the appliance
will come in contact with water or moisture to minimize rusting of metal
parts.
* The refrigerator should not be installed near any heat source or in a
location where it will come in direct contact with the sunlight.
* The components, if need to be replaced, should be replaced with like
components, and should be replaced by the manufacturer or its service
agent or a similarly qualified person in order to avoid a hazard and to
minimize the risk of possible ignition and also to decrease the cooling
performance due to incorrect parts or improper service.
13