Pahlen EcoVISE Mode D'emploi page 10

Pump EcoVISE, EcoFloVISE
Weekly timer
The built-in week timer can change the pump speed from "MED" to either "HIGH" or "LOW".
Set the time and day of the week
Here's how to set the clock and day of the week:
1. Press "Config" button.
2. Press "Plus" button several times until the display shows "CLoc"
3. Press "Config" button again.
4. Press / hold "Plus / Minus" buttons until the correct time is displayed.
5. Press "Config" button again.
6. Press "Plus / Minus" buttons until the correct day is displayed (1 = Monday, .., 7 = Sunday)
7. Press "Config" button again. Now the time and day are set.
Preset weekly timer
The preset timer programs TP1 to TP5 are designed to cover most situations, see below.
Enable a preset timer program like this:
1. Press "Config" button.
2. Press "Plus" button several times until the display shows "ti1-9".
3. Press "Config" button again.
4. Press "Plus / Minus" buttons until the display shows the timer
program to be activated.
5. Press "Config" button again. Now the timer program is enabled.
Turn off weekly timer
"OFF" in "ti1-9" mode turns off the weekly timer program.
10
ENGLISH