Mitsubishi Diamond Plus 73 Mode D'emploi page 17

All manuals and user guides at all-guides.com
Specifications
Monitor
Specifications
Picture Tube Diagonal :
Viewable Image Size:
Radius:
Input Signal Video:
Sync:
Display Colors Analog input:
Synchronization Horizontal:
Range Vertical:
Resolutions Supported
Resolution based on horizontal
and vertical frequencies only
Active Display Area Horizont:
(Factory setting) Vertical:
Active Display Area
(Full scan)
Power Supply
Current Rating
Dimensions
Weight
Environmental Considerations
Operating Temperature:
Humidity:
Altitude:
Storage Temperature:
Humidity:
Altitude:
NOTE: Technical specifications are subject to change without notice.
Diamond Plus 73
Monitor
90˚ deflection, 0.25mm grille pitch,
43cm(17inch)
medium short persistence phosphor,
41cm(16inch)
aperture grille CRT, multi-layered, anti-
50000mm
staticscreen coating, dark-tint screen.
ANALOG 0.7 Vp-p/75 Ohms
Separate sync. TTL Level
Horizontal sync. Positive/Negative
Vertical sync. Positive/Negative
Depends on the display card used.
Unlimited number of Colors
31kHz to 70kHz Automatically
Automatically
55Hz to 120Hz
Some systems may not support all
640 x 480 @60 to 120Hz
modes listed
800 x 600 @55 to 110Hz
832 x 624 @55 to 105Hz
1024 x768 @55 to 87Hz....
Recommended resolution at 85 Hz for
1280 x 1024 @55 to 66Hz
optimal display performance.
Dependent upon signal timing used,
310mm
and does not include border area.
232mm
Dependent upon signal timing used,
325mm
and does not include border area.
243mm
AC 100-240V, 50-60Hz
1.5A @ 100-240V
403(W)x420(H)x420(D)mm
16.4kg
0˚C to +35˚C
30% to 80%
0 to 3000m
-20˚C to + 60˚C
10% to 90%
0 to 13700m
E-9
Notes
E