Inseego Wavemaker PRO 5G Outdoor CPE Guide D'utilisation page 6

Installing the FW2000e
All manuals and user guides at all-guides.com
Attaching the device to the device elevation
bracket
1. Remove the installation handle from the
device.
2. Attach a ground wire to the back of the
device with the ground screw.
M5 10mm ground
screw / washer
3. Place the M6 external locking washers on the
M6 21mm bracket mount bolts.
M6 21mm bracket
mount bolt and washer
4. Mount the device to the device elevation
bracket using a hex driver to tighten the bolts
to 2.0 Nm.
English