ARENDO 303392 Mode D'emploi page 18

• Remove the power plug from the socket
when the device is not in operation, as
well as during cleaning and assembly.
• If the power cord is damaged, this must
be replaced by the manufacturer or by a
qualified person in the event of a defect,
in order to prevent damage.
• Never insert body parts, or objects which
are not defined for it, in the blender.
• If the blade unit is blocked and does not
move, always disconnect the plug from
the socket before removing the objects
that are blocking the blade.
• The appliance is intended for personal
use only.
• Switch off the appliance and disconnect
the plug if you want to remove accesso-
ries, such as the blade unit.
• Before using the product, first check if
the delivered item is complete, accurate
and undamaged.
18
English