Samsung 6+ Serie Guide De L'utilisateur page 5

Stand (1EA)
Follow the steps below to connect the TV to the stand. (50 inch model only)
1. Connect the Guide Stand to the Stand using five screws (M4 X L12).
2. With your TV upright, connect the TV to the Stand.
✎
NOTE
x
Make sure to distinguish between the front and back of the Stand and Guide Stand when assembling them.
x
Make sure that at least two persons lift and move the PDP TV.
x
Stand the product up and fasten the screws. If you fasten the screws with the PDP TV placed down, it may lean to
one side.
[
Do not insert your fingers into the stand base slot of the TV when installing the stand base.
Install the Stand
Guide Stand (1EA)
Screws (M4 X L12)
Guide Stand
Stand
Rear
3. Fasten two screws (M4 X L10) at position 1, and then
Top view
Front
Rear
2
Screws (M4 X L10)
1
fasten three screws (M4 X L10) at position 2.
5EA (M4 X L12)
5EA (M4 X L10)
Screws (10EA)
5
English