VITO VILAPHLV2 Mode D'emploi page 23

When not in use, store the laser level in a dry, clean place, free of corrosive smoke and out of children's reach.
Remove the battery when storing.
Never dispose of power tools and batteries with your household waste!
According to the European Directive 2012/19/EC on electrical and electronic equipment waste and its transposition into
national law, power tools must be collected separately and delivered to the collection sites intended for this purpose.
According to the Directive 2006/66/EC, defective or used battery packs and batteries, must be collected separately and
disposed of to designated collection points.
You can get information regarding the disposal of the machines and batteries through the person in charge for recycling in
your city.
WhatsApp: +351 965 157 064
E-mail: support@vito-tools.com
Question/Problem - Cause
Causa
The laser does not turn on when you set the "ON/OFF"
switch to the "ON" position:
• The batteries are discharged;
• Reverse polarity of the alkaline batteries;
Solution
• Replace discharged batteries with charged ones;
• Insert the batteries according to the polarity indicated
in the battery compartment;