VITO VILAPHLV2 Mode D'emploi page 20

Always read the safety, operating and maintenance
instructions before you start operating your self-
levelling laser level. The instruction manual is considered
an integral part of the laser and must always be made
available alongside the product. Keep the manual for future
reference.
While operating self-levelling cross-line laser level,
you should take
precautions to avoid the risk of fire and personal injury.
Always operate the laser level carefully and responsibly.
Always take in consideration that in using the appliance you
accept full responsibility for any accidents caused to third
parties or their property during its use.
Individuals who have not read the instruction manual and
are not familiarized with how to operate the 2X360° self-
levelling cross-line laser must not use it. Before using the
laser for the first time, users should be instructed by the
seller or any other qualified person on how to use the
product. Users must ensure they are instructed adequately
and practically.
Never allow the self-levelling laser level to be used by
children, individuals with limited physical, sensory or
mental abilities, individuals with lack of experience and
knowledge of the appliance, or others unfamiliar with the
use instructions.
Do not use the laser if you are not both physically and
mentally well. Do not operate it while you are tired or under
the influence of medication, drugs or alcohol. If you have a
health problem, ask your doctor if it is safe for you to
operate the self-levelling laser level before doing so.
Never point the laser beam at people or animals and
do not look directly into the beam. This device
produces class 2 laser radiation. Overexposure of the eyes
to the laser can result in blindness.
The laser is supplied with a warning label. Before first use,
make sure the label is affixed and never use the laser with
an illegible warning label.
Wearing laser safety goggles reduces the risk of injury.
Ensure that the characteristics (lens) of the goggles match
the type of laser beam.
into account basic safety
The self-levelling laser level may only be used as
stated in this instruction manual. Any other use which
may cause damage to the laser and result in injury to the
user due to exposure to the laser beam is not permitted.
For safety reasons, any alteration to the self-levelling laser
level other than installing
authorized by the manufacturer, is prohibited. The warranty
on your self-levelling laser level will be voided if you alter it
in any way.
You may get information on authorized accessories from
your official VITO dealer.
Do not expose the laser to rain or operate it in wet or damp
conditions. The presence of water in a laser increases the
risk of damage.
Do not expose the laser to sunlight, extreme temperatures
or large temperature variations. If the laser is operated
under these conditions, its accuracy may be adversely
affected.
Do not operate 2x360º self-levelling cross-line lasers
in explosive atmospheres, such as in the presence of
flammable liquids, gases or dust. Laser levels create sparks
that can ignite liquids, gases, or dust.
Cleaning:
Always keep the laser level clean and dry, free from oil,
lubricants or grease. Clean all laser components and
accessories after use.
Do not use aggressive cleaning products. These products
may damage plastics and metals, compromising the safe
operation.
Maintenance:
Only maintenance works described in this instruction
manual may be carried out. All other works must be
performed by an official dealer.
Keep all nuts and bolts well tightened in order to ensure a
safe operation.
accessories specifically